This is my Lofrans Tigres electric windlass which I have had for 5 years now and
served me very well. Though the pictures and instructions serve for this
windlass, they will also be relevant to all types of anchor windlass.
At the front of the windlass is a sight glass for oil and an oil filler. Gives this a quick check (you
may need a torch). I have never had to add any oil and it is not a requirement for general
maintenance. Check the manual for the correct grade if required.
Remove the 'O' ring at the end of the shaft. This is to stop you unwinding the locking bar
too far. The 'O' ring perishes every season, so I always replace it.
Now you can unwind and remove the locking bar to release the 'gypsy'. You can't remove the 'gypsy' yet because of the 'stripper' that is located underneath. The stripper is to make sure the chain doesn't wrap all the way round the drum, and means it gets fed back down the chain feed hole. Remove the 2 bolts holding the stripper and remove the 'gypsy'
If the 'gypsy' is seized in place, try banging in 2 wooden wedges between the 'gypsy' and the casing. Better still, use a 'puller' to remove it
Wipe the cone and all surfaces with a rag to remove the old grease. Check for any corrosion, and if necessary, gently abrade with some fine emery cloth. Give all surfaces a coating of marine grease and re-assemble.
One common problem with windlasses's is the mixed metals used. Mine is no different, having an aluminium casing, but stainless steel bolts. This is a recipe for corrosion and seized fittings. When you replace the stripper, coat the bolts in an anti-seize paste. I do this as a matter of course each year just to make sure the bolts will always come undone. I also do the same for the swinging locking arm which also bolts into the alloy casing.
The drum on the other side is simple enough. Remove the central bolt and withdraw
the drum. Grease up the cams that allow manual operation of the windlass.
Replacement just requires you to line up the key and sprung loaded cams. You can
tell if it's lined up as you will feel slight spring pressure as you put the drum back on
.
Finally, the best protection you can give your windlass is a cover! A waterproof canvas cover
fitted over your windlass when not in use will protect is from the worst of the water,
especially when you are beating. This is my winter cover, I have a fancier one for the
sailing season!